Need help?Do you have a question about the Innovative Technology Spectral NV200 and is the answer not in the manual?
Lists related documents for SSP/eSSP, ccTalk, and Software.
Outlines the warranty terms and conditions for hardware products.
Highlights key safety points to be aware of when using the product.
States limitations of liability for product installation and use.
Provides a high-level overview of the NV200 Spectral's features.
Lists the main features and capabilities of the NV200 Spectral.
Describes common scenarios and environments where the NV200 Spectral is used.
Introduces the different parts and optional modules of the NV200 Spectral.
Lists part numbers and descriptions for NV200 Spectral heads.
Lists available bezel types with part numbers and descriptions.
Lists different cashbox types with part numbers and descriptions.
Lists available optional modules with part numbers and descriptions.
Lists consumables like safe bags and roll tickets with part numbers.
Provides dimensional drawings and specifications for the NV200 Spectral.
Details the weight of the NV200 Spectral and its various cashbox/module options.
Specifies the operating temperature and humidity ranges for the unit.
Outlines the supply voltage and current requirements for the NV200 Spectral.
Details the DC voltage ranges and ripple requirements for power.
Shows current draw based on module combinations and cashbox types.
Specifies the voltage levels for inputs and outputs.
Explains the support for opto-isolated communication and connection requirements.
Presents reliability metrics like MCBF and duty cycle.
Defines Mean Cycles Between Failure/Interruption for the NV200 Spectral.
Explains the duty cycle limits for the Safe Interface module.
Details the dimensions and quality guidelines for accepted media.
Provides guidance on the condition of notes for optimal performance.
Provides guidance on selecting appropriate power supplies for the unit.
Discusses hardware and software compatibility for the NV200 Spectral.
Covers compatibility with different machine mounting and interfacing.
Details compatibility for replacing older ITL products and mounting considerations.
Explains pin-to-pin compatibility with existing machine harnesses.
Emphasizes the importance of a suitable power supply for the NV200 Spectral.
Discusses compatibility issues with interface protocols and re-programming.
Explains potential issues with timings and host machine compatibility.
Guides on using Validator Manager for re-programming the NV200 Spectral.
Details the mounting procedure for the Safe Interface module.
Explains the components and mounting of the standard Safe Interface.
Describes the mounting of the Freefall version of the Safe Interface.
Discusses mounting points for NV200 Spectral with different cashbox/module options.
Provides mounting dimensions for the NV200 Spectral with a standard cashbox.
Shows mounting dimensions for the NV200 Spectral with a TEBS cashbox.
Provides mounting dimensions for the NV200 Spectral with a 2200 note cashbox.
Dimensional drawing for mounting the 80mm Safe Interface.
Dimensional drawing for mounting the 27mm Safe Interface.
Explains the importance and method of earth bonding the NV200 Spectral.
Lists thread type and length for mounting screws.
Provides considerations for mounting the NV200 Spectral.
Introduces the section on updating datasets and firmware for the NV200 Spectral.
Provides information on where to download software updates and drivers.
Explains how to install ITL drivers for connecting validators to Windows.
Covers the process of programming datasets and firmware for the unit.
Describes Validator Manager utility for reprogramming ITL validators.
Details the function and requirements of Validator Manager.
Lists the minimum system requirements for installing Validator Manager.
Explains reprogramming the NV200 Spectral using an SD card.
Introduces SD card reprogramming method and requirements.
Specifies the minimum and maximum SD card requirements.
Provides step-by-step instructions for SD card updates.
Describes the process for updating the unit via remote SSP commands.
Introduces supported industry protocols and how to get information.
Details the two main connectors for interfacing and programming.
Explains user-accessible interfaces like dip switches and buttons.
Details the function of the DIP switch bank for unit configuration.
Describes the function of the button on the SMART Ticket.
Explains the 4 dipswitches located on the SMART Ticket.
Introduces the secure communication protocols SSP and eSSP.
Explains the design and purpose of SSP/eSSP for security.
Details the pin configuration for the SSP/eSSP interface.
Shows connection diagrams for NV200 Spectral to host machines.
Illustrates connecting the NV200 Spectral via USB with an adaptor.
Shows connection diagram for NV200 Spectral with a Smart Coin System.
Introduces the ccTalk serial communications protocol.
Explains ccTalk protocol and its use with NV200 Spectral.
Details the pin configuration for ccTalk communication.
Covers DES encryption setup and trusted mode for ccTalk.
Introduces the minimal maintenance requirements for the NV200 Spectral.
Suggests cleaning frequency for optical lenses.
Provides instructions for cleaning the NV200 Spectral unit.
Details how to clean the validator's note path and internal components.
Explains the process for cleaning the NV200S cashbox.
Specific instructions for cleaning the NV200S cashbox sensors.
Instructions for cleaning the TEBS cashbox and its moving parts.
Guides on cleaning the printer mechanism of the SMART Ticket.
Instructions for cleaning the Bunch Note Feeder (BNF).
Summarizes bezel flash codes and recommended actions for errors.
Lists flash codes for individual modules like TEBS and Spectral Payout.
Details flash codes displayed on the TEBS cashbox lock cam.
Lists flash codes for the Spectral Payout module's status.
Lists error codes indicated by the SMART Ticket button flashes.
Lists flash codes for the BNF LED strip for troubleshooting.
Details how to check power cable connections for the unit.
Explains power connections for the NV200 Spectral.
Explains power connections for the TEBS cashbox.
Details the connector for the Spectral Payout module.
Details the connector for the SMART Ticket module.
Guides on checking the power supply output voltage and polarity.
Troubleshooting steps for communication issues with the host system.
Explains how to retrieve event and performance logs using an SD card.
Provides steps to clear jams where a note is visible or not.
Instructions for clearing a jam with the note visible in the path.
Steps to clear a jam when the note is visible after head removal.
Procedure to clear a jam when the note is not visible.
Instructions for clearing jams specifically within the TEBS cashbox.
Steps to clear jams from the Spectral Payout module.
Instructions for clearing jams within the Bunch Note Feeder.
Steps to clear jams from the SMART Ticket module.
Procedures to clear jams from the Safe Interface Module.
Recommends testing procedures after clearing an error.
States compliance with EC Declaration of Conformity and RoHS.
Details FCC compliance and measures to correct interference.
Lists central bank validations received for the NV200 Spectral.
Provides drawings for various interface and power cables.
Shows the drawing for the USB A to B cable.
Shows the drawing for the SSP interface cable.
Shows the drawing for the RS232 cable.
Shows the drawing for the Smart Payout cable.
Shows the drawing for the Spectral Payout Extension Cable.
Provides detailed dimensional drawings of various configurations.
Dimensional drawing for a specific NV200S configuration.
Dimensional drawing for a specific NV200S configuration.
Dimensional drawing for a specific NV200S configuration.
Dimensional drawing for a specific NV200S configuration.
Dimensional drawing for a specific NV200S configuration.
Dimensional drawing for a specific NV200S configuration.
Dimensional drawing for a specific NV200S configuration.
Dimensional drawing for the 80mm Safe Interface.
Dimensional drawing for the Safe Interface Free Fall.
Details specifications for locks used with the NV200 Spectral.
Shows the components of the keyless locking cam.
Shows the components of the TEBS locking cam.
Lists specifications for various connectors used with the NV200 Spectral.
Explains how to switch the unit to SSP programming mode.
Provides advice on handling cashboxes and TEBS bags.
Details setting up ccTalk DES encryption with a trusted machine.
Explains the single note escrow facility of the NV200 Spectral.
Illustrates the sequence of operation for the escrow facility.
Explains the naming convention for dataset and firmware files.
Details the use of plastic inserts for the Bunch Note Feeder.
Shows coloured inserts for the 2200 note cashbox locks.
General| Brand | Innovative Technology |
|---|---|
| Model | Spectral NV200 |
| Category | Bank Note Validator |
| Language | English |
To Next Page