Need help?Do you have a question about the Innovative Technology BV20 and is the answer not in the manual?
Introduces the process of updating datasets and firmware for the BV20.
Describes Smiley Secure Protocol (SSP) and Encrypted SSP (eSSP) for secure interfaces.
Introduces ccTalk, a serial communication protocol for cash handling peripherals.
Introduces MDB (Multi-Drop Bus) protocol used in vending machines.
Introduces the Parallel interface, a 4-way output interface.
Introduces the Binary interface for machines needing more denominations than serial allows.
Introduces the Pulse interface for accepting up to 16 channels.
Explains the status signals indicated by the BV20's bezel LED flashes.
Details the functions performed by the BV20's configuration button.
Guides on verifying power and communication connections using adapters.
Outlines the steps to check settings on a programmed BV20 unit via bezel LED codes.
Step-by-step instructions for clearing a banknote jam from the BV20.
Explains how to resolve checksum errors by reprogramming or using EEPROM software.
Guides on re-initializing BV20 sensors using diagnostic tools and calibration paper.
Details the supply voltages and current requirements for the BV20.
Repeats instructions for switching to SSP programming mode.
General| Brand | Innovative Technology |
|---|---|
| Model | BV20 |
| Category | Bank Note Validator |
| Language | English |
To Next Page