Need help?Do you have a question about the Innovative Technology Smart Coin System and is the answer not in the manual?
Details the revision history and amendments of the manual.
States the copyright ownership and reproduction restrictions for the manual.
Outlines the terms, conditions, and limitations of the product warranty.
Key safety points and warnings to be aware of during use and maintenance.
Provides a high-level overview of the SMART Coin System's capabilities.
Lists the main functionalities and benefits of the SMART Coin System.
Describes common scenarios and industries where the SMART Coin System is used.
Initial steps and considerations before mounting the SMART Coin System.
Specifies the dimensional and mounting requirements for the baseplate.
Instructions on how to physically attach the SMART Coin System to the baseplate.
Details how to connect the SMART Coin System to the host machine via cables.
Explains how to configure the unit using the front button, covering button functions, interface types, DES mode, programming, and SD card updates.
Describes how the unit operates and the meaning of status indicator LEDs and flash codes.
Step-by-step instructions for safely removing the SMART Coin Feeder.
Procedures for clearing coin jams within the hopper mechanism.
Instructions on how to clear coin jams from the feeder unit.
Guide to diagnosing faults using the Smart Hopper module's status indicators.
Provides detailed physical dimensions of the SMART Coin System unit.
Details power requirements, performance, reliability, and environmental data.
Explains the importance and method of grounding the base plate for safety.
Describes the connectors for power, SSP, and USB communication.
General| Operating Voltage | 12V DC |
|---|---|
| Protocols | SSP |
| Acceptable Currencies | Configurable. Depends on the country. |
| Communication Interface | USB |
| Power Supply | 12V DC |
| Storage Temperature | -20°C to 60°C |
To Next Page
