Need help?Do you have a question about the Innovative Technology NV200 and is the answer not in the manual?
Lists other documents relevant to understanding SSP and eSSP integration.
Highlights key safety points and warnings for product usage and maintenance.
Overview of the NV200 as a high volume, secure banknote validator.
Lists the primary features and capabilities of the NV200 validator.
Details the various modules and cashbox options for the NV200.
Provides physical dimensions for the NV200 and its configurations.
Specifies voltage, current, and power supply guidance for the NV200.
Details the acceptable media types and their dimensions for the NV200.
Lists regulatory compliances and approvals for the NV200 family.
Covers hardware and software compatibility for integrating the NV200.
Instructions for removing standard and TEBS cashboxes.
Procedures for fitting locks to the NV200 and its cashboxes.
Guidance on mounting the NV200 and cashbox configurations.
Details the Smiley® Secure Protocol for secure cash handling.
Explains the ccTalk serial communications protocol for cash handling.
Describes the Multi-Drop Bus standard for vending machines.
Information on the Pulse interface for note acceptance.
Information on obtaining the latest software, drivers, and tools.
Procedures for updating datasets and firmware using Validator Manager.
Instructions for cleaning the NV200 validator, cashbox, and ticket module.
Interprets bezel LED flash patterns to diagnose errors.
Details flash codes for TEBS, Payout, and Ticket modules.
Guides on verifying power supply and cable connections.
Step-by-step instructions for clearing note jams.
Procedure for manually paying out notes from a jammed payout module.
Introduction to diagnostic software for unit testing and troubleshooting.
Technical drawings for various NV200 configurations.
Graphs showing current and power consumption under different states.
Detailed specifications for NV200 and TEBS locking mechanisms.
Diagrams illustrating various cable connections and pinouts.
Procedure to switch the NV200 to its programming mode.
Explanation of the file naming system for datasets and firmware.
General| Note Capacity | Up to 600 notes |
|---|---|
| Power Supply | 12V DC |
| Protocols | SSP, MDB |
| Communication Interface | USB, RS232 |
| Supported Currencies | Multiple (configurable) |
| Security Features | Optical and magnetic sensors, anti-stringing technology |
To Next Page