NV200 Family User Manual
<< Back to Contents
Copyright © Innovative Technology Ltd 2016 Doc: NV200 Family Manual
Version: 1.0
Page 46 of 119
Recently the processor has been changed leading to 2 different versions of firmware being available.
If the wrong file for this validator is selected the ‘Program Device’ button will be greyed out. Details of
the change can be found in
Appendix 10.10
.
Once the file has been selected its information will be populated and the Program
device tab will become active. Select ‘Program Device’, the unit’s bezel will begin to
flash signalling the update has begun.
Interrupting the download process can result in the
unit entering a non-functional state, once the
process has started it cannot be halted.
When completed the unit will restart and a pop up box will appear saying Device
Programming Complete.
6.3.2 DA3
6.3.2.1 General Description
The DA3 is a hand-held validator programming system that enables the user to re-
program ITL banknote validators in the field, without the use of a PC. Dataset and
firmware files for different validator models can
be stored on the DA3. Once programmed the
user can update or override existing software as
well as test the functionality of the validator,
away from the host machine.
6.3.2.2 System Requirements
• Windows XP SP3 or above
• .Net Framework 4
• 2015 C++ Redistributable
• 256mb ram
• 50mb hard disk free
To Next Page
Loading...
