Smart Coin System User Manual Page 1 of 28
Copyright © Innovative Technology Ltd 2015 GA02033
Table of Contents
1 DOCUMENT INTRODUCTION 2
1.1 Document Issue 2
1.2 Copyright 2
1.3 Limited Warranty 2
1.4 Product Safety Information 3
2 PRODUCT INTRODUCTION 4
2.1 General Description 4
2.2 Key Features 4
2.3 Typical Applications for the Smart Coin System 5
3 INSTALLATION 6
3.1 Preparation 6
3.2 Baseplate Mounting Requirements 6
3.3 Mounting the Smart Coin System 7
3.4 Connect the unit 8
3.5 Configuration 8
3.5.1 Configuration Button Functions 8
3.5.2 Flash Counts (Interface Type) 9
3.5.3 DES Trusted Mode 9
3.5.4 Programming and Dataset loading 9
3.5.5 SD Card Update 9
3.6 Basic Operation 10
4 FIELD MAINTENANCE 11
4.1 Detaching SMART Coin Feeder 11
4.2 Clearing a Jam from the Hopper 12
4.3 Clearing a Jam from the Feeder 15
4.4 Fault Finding - Flash Codes 16
5 MECHANICAL & ELECTRICAL DOCUMENTATION 18
5.1 Dimensions 18
5.2 Technical Specifications 19
5.3 Earth Bonding 20
5.4 Electrical Interfaces 20
6 GLOSSARY OF TERMS 22
7 CABLE DRAWINGS 25
8 CONTACT 28
To Next Page
Loading...
