Innovative Technology BV20 - 5 PROTOCOLS AND INTERFACING

GA02118 User Manual BV20
<< Back to Contents
Copyright © Innovative Technology Ltd 2018 Doc: GA02118/1 User Manual BV20
Version: 1.0
Page 20 of 60
Caution!
This option is only available for SSP
and ccTalk protocols
4.4.4 Configuration Card
4.4.4.1 General Description
Configuration Card allows user to change configuration options/ protocol parameters
without PC or DA3.
4.4.4.2 Re-programming via Configuration Card
Following the instruction of Configuration Card. Manually print and cut off
Configuration card (depending on bezel width 66 or 72mm). Power on the BV20 and
wait unit the BV20 idles. Press the BV20 configuration button once and enter filled
configuration card to validator for changing options/ protocol.