Inomatic AMTEK 450 - User Manual

AMTEK
150/250/350/450/750
Operation Manual
58kHz Acousto-Magnetic EAS System
valid for
AM Pro-Line electronics TX/RX/Mono
Hardware Version AMPRO 700 V7.4, Firmware Version AMP 3.1

Summary

SAFETY GUIDELINES

AMTEK SYSTEM

2.6.1 Single Mono Antenna Configuration

Diagram and description of the single mono antenna system configuration.

2.6.2 Multiple Mono Antennas Configuration

Diagram and description of the multiple mono antenna system configuration.

2.6.3 Single TX Antenna Dual System

Schematic for configuring the system as a single TX antenna in a dual system.

2.6.4 Single TX Antenna Split System

SYSTEM INSTALLATION

3.2. Installation Requirements

Lists essential requirements and guidelines for proper system installation.

3.3. Installation Procedure

Step-by-step instructions for installing the AMTEK EAS system.

TUNING OF THE MATCHING CIRCUITS

4.1. Processor Antenna Matching

Instructions for matching the processor antenna loops and checking LED indicators.

4.2. Matching Capacitors Default Setting

4.3. RX Matching Circuit

SYNCHRONIZATION

5.2. Synchronization Principle

5.3. Hardware Synchronization

LAN CONNECTION

Inomatic AMTEK 450 Specifications

General

Brand	Inomatic
Model	AMTEK 450
Category	Security System
Language	English