Inovance MD280NT3.7GB - Group F1: Motor Parameters and V;F Control

Function Code Table MD280 User Manual
- 78 -
Function
Code
Parameter Name Setting Range
Min.
Unit
Default
Property
F0-17
5DQJHRIDX[LOLDU\
frequency Y
0%–150% 1% 100%
ƿ
F0-18
Frequency source
superposition
0: Main frequency source X
1: X and Y superposition
2: Switchover between X and
Y
3: Switchover between X and
"X and Y superposition"
4: Switchover between Y and
"X and Y superposition"
10
ƿ
F0-20
Frequency offset of
DX[LOLDU\IUHTXHQF\
source for X and Y
superposition
+]WRPD[LPXP
IUHTXHQF\)
0.01 Hz 0.00 Hz
ƿ
F0-21
Carrier frequency
adjustment with
temperature
0: No
1: Yes
11
ƿ
F0-22
Binding command
source to frequency
source
8QLW¶VGLJLW%LQGLQJRSHUDWLRQ
panel command to frequency
VRXUFH
0: No binding
1: Frequency source by digital
setting
2: AI1
3: AI2
3XOVHVHWWLQJ',
5: Multi-reference
6: Simple PLC
7: PID
$,$,
9: Communication setting
7HQ¶VGLJLW%LQGLQJWHUPLQDO
command to frequency
VRXUFH±VDPHDVXQLW¶V
digit
+XQGUHG¶VGLJLW%LQGLQJ
communication command to
IUHTXHQF\VRXUFHDPHDV
unit’s digit
1 000
ƿ
Group F1: Motor Parameters and V/F Control Parameters
F1-00 Rated motor power 0.2–1000.0 kW 0.1 kW
Model
dependent
ƾ
F1-01
Rated motor
voltage
1–480 V 1 V
Model
dependent
ƾ
efesotomasyon.com