Inovance MD300 Series User Manual

Contents
Foreword.......................................................1
Chapter 1 Safety and Precautions ...........5
1.1 Safety issues............................................5
1.2 Precautions ..............................................7
Chapter 2 Product Information...............10
2.1 Designation Rules..................................10
2.2 Nameplate..............................................10
2.3 MD300 Inverter Series ...........................11
2.4 Technical Specification ..........................12
2.5 Configuration and Dimensions ...............15
2.6 Options and Accessories .......................18
2.7 Routine Maintenance of inverter ............19
2.8 Instructions on Warranty of Inverter .......20
2.9 Prototyping Guide ..................................20
2.10 Guide to Prototyping of Brake Components
.....................................................................21
Chapter 3 Mechanical and Electrical
Installation..................................................23
3.1 Mechanical installation...........................23
3.2 Electrical Installation ..............................27
Chapter 4 Operation and Display...........37
4.1 Introduction to Operation and Display
Interface.......................................................37
4.2 Description of Function Code Viewing and
Modification Methods ...................................38
4.3 Method of Viewing Status Parameter.....39
4.4 Password Setting ...................................39
4.5 Automatic Tuning of Motor Parameters..40
Chapter 5 Function Parameter Table.....41
Chapter 6 Parameter Description ...53
Group F0 Basic parameters .................53
Group F1 Motor Parameters.................59
Group F2 Vector and VF Control
Parameters ...........................................61
Group F3 Terminal input/output............63
Group F4 Start/Stop Control Parameters66
Group F5 Fault and Protection .............67
Group F6 Auxiliary Function.................69
Group FF Factory Parameters (Reserved)
..............................................................73
Group FP User Password.....................73
Chapter 7 EMC (Electromagnetic
Compatibility)......................................74
7.1 Definition ........................................74
7.2 EMC Standard Description.............74
7.3 EMC Introduction............................74
Chapter 8 Troubleshooting and
Countermeasures ...............................78
8.1 Fault Alarm and Countermeasures.78
8.2 Common Fault and Resolutions .....89
Attachment Non-standard
Specification........................................90
Attachment A: MD300 Frequency Switching
– Line Speed Displaying Non-standard
Function Specification...........................90
Attachment B: MD300 with FDT Function
Non-standard Specification...................91
efesotomasyon.com

Inovance MD300 Series Specifications

General

Brand	Inovance
Model	MD300 Series
Category	Inverter
Language	English

Summary

Chapter 1 Safety and Precautions

Safety Issues During Operation

Safety considerations for installation, wiring, operation, and maintenance phases.

Precautions for Safe Use

Operational, environmental, and device-specific precautions for safe and effective use.

Chapter 2 Product Information

Inverter Designation Rules

Explains the naming convention and coding for inverter models.

Product Nameplate Details

Details the information found on the product's nameplate.

MD300 Inverter Series Models

Lists MD300 inverter models and their corresponding technical data.

Technical Specifications Overview

Provides a comprehensive list of technical specifications for the inverter.

Configuration and Dimensions

Illustrates the physical layout, appearance, and mounting dimensions.

Available Options and Accessories

Lists available options and accessories for the inverter.

Routine Maintenance Procedures

Guidelines for regular inspection, cleaning, and upkeep of the inverter.

Inverter Warranty Instructions

Outlines the warranty terms and conditions for the inverter.

Prototyping Guide

Guidance on selecting and applying the inverter for prototyping.

Brake Components Prototyping Guide

Recommendations for selecting brake components for inverter systems.

Chapter 3 Mechanical and Electrical Installation

Mechanical Installation Guidelines

Covers installation environment, location, and physical mounting requirements.

Electrical Installation Recommendations

Details peripheral electrical components, their usage, and wiring.

Inverter Wiring Diagrams

Illustrates wiring diagrams for single-phase and three-phase inverter connections.

Main Circuit Terminal Connections

Explains main circuit terminals for single-phase and three-phase inverters.

Control Terminal Functionality

Details the layout and function of control circuit terminals.

Chapter 4 Operation and Display

Operation Panel Interface

Overview of the operation panel, indicators, and display zones.

Function Code Navigation and Modification

Explains how to navigate and modify function codes using the three-level menu.

Viewing Inverter Status Parameters

How to view inverter status parameters using the LED digital tube.

User Password Protection

Details the user password protection function for parameter access.

Automatic Motor Parameter Tuning

Procedures for automatic motor parameter tuning for vector control.

Chapter 5 Function Parameter Table

Group F0 Basic Functions

Lists basic function parameters F0-00 to F0-13 with their settings.

Group F1 Motor Parameters

Details motor parameters F1-00 to F1-11 for optimal inverter performance.

Group F2 Vector and VF Control

Parameters for Vector and VF control modes, including PI adjustments.

Group F3 Terminal Input/Output

Parameters related to terminal input/output configurations.

Group F4 Startup/Stop Control

Parameters for controlling inverter startup and stop sequences.

Group F5 Protection Functions

Parameters for various protection functions and fault handling.

Group F6 Auxiliary Functions

Parameters for auxiliary functions like frequency limits and jog operations.

Group FP User Password and Initialization

User password management and parameter initialization settings.

Chapter 6 Parameter Description

F0 Basic Parameter Descriptions

Detailed explanation of basic function parameters F0-00 to F0-06.

F2 Vector and VF Control Descriptions

Explains parameters for Vector and VF control modes, focusing on PI adjustments.

F3 Terminal Input/Output Descriptions

Describes terminal input/output parameters and their functions.

F4 Startup/Stop Control Descriptions

Details parameters for startup and stop control, including DC brake functions.

F5 Fault and Protection Descriptions

Explains fault and protection parameters like overload and overvoltage.

F6 Auxiliary Function Descriptions

Covers auxiliary functions such as frequency limits, jog, and MS speed.

Chapter 7 EMC (Electromagnetic Compatibility)

EMC Definition and Standards

Defines EMC, outlines relevant standards, and introduces interference.

EMC Handling and Installation Precautions

Covers installation, interference handling, leakage current, and filter installation.

Chapter 8 Troubleshooting and Countermeasures

Fault Alarm Troubleshooting Flows

Diagnostic flowcharts for specific fault codes (Err01-Err23).

Common Fault Resolutions

Lists common inverter faults and their resolution steps.

Attachment Non-standard Specification

Attachment A: Frequency Switching and Line Speed Display

Details non-standard modifications for frequency switching and line speed display.

Attachment B: MD300 with FDT Function

Describes non-standard FDT function modifications for outputting ON/OFF signals.

Warranty Agreement

Warranty Terms and Conditions

Outlines the product warranty period, coverage, and maintenance policies.

Product Warranty Card

Customer and Product Information

Fields for customer, product details, and agent information for warranty service.