Chapter 2 Product Information
-18-
2.6 Options and Accessories
Table 2-4 MD300 Inverter Options and Accessories
Name Model Function Remarks
Built-in brake
unit
The letter “B”
attached
behind the
product
model
Single-phase slave built-in
brake unit (0.4kW to 2.2kW),
optional three-phase slave
from 0.75kW to 2.2kW; optional
built-in brake unit from 18.5kW
to 30kW
Three-phase slave
built-in brake unit of
3.7kW to 15kW is
standard configuration.
Injection
molding
machine card
MD30IN
Change “0A to 1A” or “0 to
24V” of the injection molding
machine to “0V to 10V” with
output isolation.
Modification of injection
molding machine for
energy saving
External LED
operation
panel
MDKE
external LED display and
operation keyboard
MD series
general-purpose RJ45
interface
extended
cable
MDCAB
Standard 8-core network cable,
and it can be connected with
MDKE.
1m, 3m,5m and 10m are
available.
Refer to Fig.2-7 Options and Accessories Installation Diagram for installation of part of options and
accessories.
Refer to relevant specification for the detailed function and use of options and accessories.
If the user needs such options and accessories, please specify when placing the order.
Injection Molding
Machine Card
Extended operation
panel interface
main circuit
terminal
Fig.2-7 Options and Accessories Installation Diagram
efesotomasyon.com
To Next Page
Loading...
