Introduction MD380 User Manual
- 4 -
Product Checking
Upon unpacking, check:
• Whether the nameplate model and AC drive ratings are consistent with your order. The
box contains the AC drive, certicate of conformity, user manual and warranty card.
• Whether the AC drive is damaged during transportation. If you nd any omission or
damage, contact Inovance or your supplier immediately.
First-time Use
For the users who use this product for the rst time, read the manual carefully. If in doubt
concerning some functions or performances, contact the technical support personnel of
Inovance to ensure correct use.
Approvals
Certication marks on the product nameplate indicate compliance with the corresponding
certicates and standards.
Certication Mark Directives Standard
CE
EMC directives 2014/30/EU EN 61800-3
LVD directives 2014/35/EU EN 61800-5-1
RoHS directives 2011/65/EU EN 50581
TUV - EN 61800-5-1
UL
-
UL508C/UL61800-5-1
C22.2 No.14-13
Notes
• The above EMC directives are complied with only when the EMC electric installation
requirements are strictly observed.
• Machines and devices used in combination with this drive must also be CE certied and
marked. The integrator who integrates the drive with the CE mark into other devices has the
responsibility of ensuring compliance with CE standards and verifying that conditions meet
European standards.
• The installer of the drive is responsible for complying with all relevant regulations for wiring,
circuit fuse protection, earthing, accident prevention and electromagnetic (EMC regulations).
In particular fault discrimination for preventing re risk and solid earthing practices must be
adhered to for electrical safety (also for good EMC practice).
• For more information on certication, consult our distributor or sales representative.
To Next Page
Loading...
