Inovance MD880-01S-0751-4 - Mechanical Installation; Storage and Transportation Precautions; Storage; Transportation

2 Mechanical Installation
- 25 -
2 Mechanical Installation
2.1 Storage and Transportation Precautions
2.1.1 Storage
The AC drive must be stored in a clean and dry room, with temperatures between -20℃
and +60℃ and temperature variation smaller than 1° C/min. If the AC drive is stored
for a prolonged period once it has been unpacked, cover it or take other appropriate
measures to ensure that it does not become dirty and that it is protected against
environmental in󶍿uences.
For storage of the AC drive, pay attention to the following three aspects:
■
Pack the AC drive with the original packing box provided by Inovance.
■
Do not expose the AC drive to moisture, high temperature, or outdoor direct
sunlight for a long time.
■
The electrolytic capacitor will deteriorate after being stored for a long time.
Therefore, the AC drive must be switched on once for at least 5 hours every 6
months. The input voltage must be increased slowly to the rated value by using a
voltage regulator. Contact professionals for technical support if necessary.
2.1.2 Transportation
■
Structures T2 to T5 are small and light and can be handled manually.
■
However, structures T6 to T12 are heavy, requiring suitable hoisting gear operated
by trained personnel. The equipment must be carried on a wooden pallet when
transported with forklifts. The equipment must be carried on a wooden pallet
when transported with cranes.