Inovance MD880-01S-0751-4 - Acceptance; Unpacking; Installation Environment

2 Mechanical Installation
- 27 -
2.1.3 Acceptance
After receiving the equipment, inspect it carefully.
Check that you have received all the items speci󶍾ed on the delivery note. Notify the
shipping company immediately of any missing components or damage. If you have any
problem, contact Inovance or the local agent for technical support.
DANGER
◆
If the equipment is damaged during transportation, the electrical safety of the cabinet
can no longer be ensured. Do not connect the equipment before high voltage testing.
◆
Failure to comply may result in death, serious injuries or great property loss.
2.1.4 Unpacking
Related user guides and accessories are placed in di󶍽erent cells in the box. The
unpacking steps are as follows:
1) Remove all cable ties and open the cover.
2) Remove all 󶍾lters.
3) Take the AC drive out.
4) Cut the plastic 󶍾lm and wrapping tape.
5) Check that no damage occurs.
6) Handle or recycle the package materials according to the local laws and
regulations.
2.2 Installation Environment
Item Quantity
Heat
dissipation
and
ventilation
Install the AC drive on a 󶍿ame-retardant surface, and ensure that su󶎀cient
space is left around the enclosure to allow for e󶎀cient heat dissipation. The
AC drive generates signi󶍾cant heat during working. Use screws to install the
AC drive on the mounting bracket vertically.
Installation
location
Ensure that the following requirements are satis󶍾ed:
No direct sunlight.
No water drops and humidity lower than 95%
No corrosive, in󶍿ammable, or explosive gas
No oil dirt and dust
Vibration
Install the equipment in a place not prone to vibration. Vibration shall not be
greater than 0.6 g. Keep away from devices such as punch presses.
Ambient
temperature
The AC drive's service life is greatly in󶍿uenced by the ambient temperature.
Do not run the AC drive under a temperature exceeding the allowed
temperature range (-10℃ to +50℃ ).