To Next PageTo Next Page
Need help?Do you have a question about the Inovance MD880 Series and is the answer not in the manual?
General safety information, including disclaimers, definitions, and safety sign explanations.
Safety precautions for unpacking, storing, transporting, and installing the AC drive.
Critical safety measures for wiring, powering on, operating, maintaining, and repairing the AC drive.
Guidelines for the safe and environmentally sound disposal of retired equipment.
General overview and identification of the AC drive via nameplate and model number.
Details voltage, power ratings, and comprehensive technical specifications of the AC drive.
Guide for selecting models, including derating factors for optimal performance.
Information on overload capacity, physical dimensions, and fastener torques.
Details the auxiliary power requirements for control modules.
Precautions for storage, transportation, unpacking, and acceptance inspection of the AC drive.
Specifies environmental conditions and necessary clearances for AC drive installation.
Details on backplate, floor, and cabinet mounting procedures for the AC drive.
Precautions and procedures for installing drives within cabinets, including heat dissipation.
Instructions for safely removing and refitting the AC drive covers for access.
Essential safety rules and precautions for performing electrical installation.
Overview of system wiring and descriptions of peripheral components.
Guidelines for routing cables to ensure Electromagnetic Compatibility (EMC).
Standard wiring diagrams and main circuit terminal details for the AC drive.
A checklist to verify correct wiring before operation.
Identifies and describes the components and overview of the HCU control module.
Details standard terminals, dimensions, and space requirements for HCU installation.
Step-by-step guide for installing the HCU module.
Lists function modules and describes applications like SLOT expansion and temperature measurement.
Details HPCU parallel control, InoLink bus, and HCU communication with SOP/PC.
Procedures for routine checks and periodic inspections to maintain the AC drive.
Information on wear parts, their service life, and replacement procedures.
Maintenance procedures for HCU control modules and SOP operating panels.
Lists available peripherals and optional function modules for the AC drive.
Guidance on selecting appropriate cables, circuit breakers, and contactors.
Selection criteria for braking resistors and braking units.
Guidance on selecting applicable motors and AC input reactors.
Guidance on selecting EMC filters and AC output reactors for EMI reduction and performance.
Step-by-step guide for installing the sheet metal base for the AC drive.
Instructions for installing the side entry output copper busbar for easier wiring.
General