Inovance MD880 Series - Installing the Sheet Metal Base

Appendix: Installation of the Sheet Metal Base and Side Entry Output Copper Busbar
- 147 -
Appendix: Installation of the Sheet Metal Base and Side
Entry Output Copper Busbar
■
Installing the sheet metal base
Step Demonstration
Step 1: Remove the rollers and
roller brackets at the bottom of
the AC drive.
Method: Loosen the hex bolts
and nuts to remove the rollers.
Loosen the eight M8 x 20
hexagon head SEMS screws to
remove the roller brackets.
◆
Number of rollers: 4
◆
Number of roller brackets: 4
Ю
Я
а
б
Step 2: Remove the plastic
ba󶎁e plate.
Ю
Я