Inovance MD880 Series - Wiring of the System

3 Electrical Installation
- 50 -
3.2 Wiring of the System
Install necessary electrical components on the input/output side of the AC drive to
ensure safety and stability of the MD880 series AC drive control system. The following
󶍾gure shows the system wiring.
Braking device (optional)
Braking
resistor
Braking
module
AC drive
Output reactor
Motor
Circuit breaker
Fuse
Contactor
Input reactor
EMC filter
Braking
resistor
Figure 3-2 System wiring of the MD880 series high-performance AC drive
NOTE
◆
The preceding 󶍾gure only shows the system wiring of the MD880 series AC
drive. For peripherals and options, see
"6 Options"
.