Inovance Monarch 220-NICE-L-C-4007 User Manual

Suzhou Inovance Technology Co., Ltd.
Add.: No. 16 Youxiang Road, Yuexi Town, Wuzhong District, Suzhou 215104, P.R. China
Tel: +86-512-6637 6666
Fax: +86-512-6285 6720
Service Hotline: 400-777-1260
http: //www.inovance.com
Shenzhen Inovance Technology Co., Ltd.
Add.: Building E, Hongwei Industry Park, Liuxian Road, Baocheng No. 70 Zone, Bao’an District, Shenzhen
Tel: +86-755-2979 9595
Fax: +86-755-2961 9897
Service Hotline: 400-777-1260
http: //www.inovance.com
User Guide
A01
Data code 19010735
NICE3000
new
Series Integrated Elevator Controller Advanced User Guide
Copyright Shenzhen Inovance Technology Co., Ltd.
Integrated Elevator Controller
Advanced User Guide
NICE3000
new
Series

Inovance Monarch 220-NICE-L-C-4007 Specifications

General

Brand	Inovance
Model	Monarch 220-NICE-L-C-4007
Category	Controller
Language	English

Summary

Preface

Safety Instructions

Essential safety guidelines for installation, operation, and maintenance of the controller.

About This Manual

Describes the manual's content including product features, safety, design, installation, and maintenance.

Legal Information

Covers warning notices, qualified personnel requirements, and disclaimer of liability.

Approvals

Details compliance with EU directives for EMC and Low Voltage.

Introduction

Basic functions

Details fundamental operational functions and features of the NICE3000new series.

Optional functions

Describes optional functions such as energy-saving, micro-leveling, and communication interfaces.

Product Information

Designation Rule and Nameplate

Explains the model designation rules and details found on the controller's nameplate.

Description of components

Provides an overview and identification of the controller's key components.

Technical Data

Lists the main technical specifications and data for the NICE3000new controller.

Technical Specifications

Details electrical and performance specifications like input power, speed, and communication modes.

System Configuration

Illustrates the system's components and their interconnections for the NICE3000new.

Installation and Wiring

Installation

Covers installation requirements, clearances, orientation, dimensions, and procedures.

Wiring

Details wiring descriptions for main and control circuits, including cable sizes and terminal arrangements.

Interface and Communication

Describes digital inputs, analog inputs, relay outputs, Modbus, and CAN communication.

Installation of Shaft Position Signals

Explains the installation of leveling signals, slow-down switches, limit switches, and final limit switches.

Standard Wiring of the System

Provides general wiring diagrams, inspection procedures, and parameter settings for the system.

Peripheral Devices and Options

Peripheral Devices

Details peripheral device connections and descriptions for external components.

Peripheral Device Selection Guide

Guides the selection of cables, circuit breakers, reactors, filters, braking components, and motors.

Options

Lists and describes optional components like Car Top Board, Display Board, and I/O Expansion Board.

Commissioning Tools

Keypad

Describes the onboard 3-button keypad for entering commands and viewing information.

Operation Panel

Details the LED operation and information display panel, including keys, indicators, and basic operations.

Cell phone commissioning software

Explains the software for parameter setting, monitoring, and firmware updates via smartphone.

System Commissioning

System Commissioning Guide

Provides a general guide to commissioning the elevator system and its basic functions.

Safety and Circuit Check

Details precautions and checks for mechanical, electrical wiring, safety circuits, and rotary encoder.

Power-on and Controller State Check

Covers checking power-on state, normal power-on status, and handling potential controller states.

Commissioning at Inspection Speed

Details motor auto-tuning procedures and running tests at inspection speed for various motor types.

Commissioning at Normal Speed

Covers shaft auto-tuning, car top commissioning, HCB installation, and riding comfort adjustments.

Parameter Description

Keypad

Describes parameters and functions displayed on the keypad, including floor display and fault codes.

Operation Panel

Explains the three-level menu structure, function code groups, and parameter table meanings.

Group F0: Basic parameters

Details basic parameters like control mode, command source, and motor specifications.

Group F1: Motor parameters

Covers motor type, encoder settings, rated motor data, and auto-tuning parameters.

Group F2: Vector control parameters

Explains parameters for speed and current loop control in vector control mode.

Group F3: Running control parameters

Details parameters for startup speed, acceleration/deceleration curves, and special deceleration rates.

Group F4: Floor parameters

Covers parameters for leveling adjustment, current floor, and floor height/leveling plate data.

Group F5: Terminal function parameters

Details settings for DI terminals (input signals) and relay outputs (Y1 to Y6).

Group F6: Basic elevator parameters

Covers parameters for top/bottom floors, parking, fire emergency, elevator lock, and service floors.

Group FE: Display setting parameters

Explains parameters for setting display content for floors, keypad, and system states.

Group FP: User parameters

Covers user password settings, parameter updates, and contract number configuration.

Group Fr: Leveling adjustment parameters

Details parameters for enabling leveling adjustment and recording leveling records for each floor.

Group E0-E9: Fault record parameters

Lists parameters for recording last and 10th fault codes, subcodes, time, and system states.

Troubleshooting

Elevator Fault Display

Describes how fault codes and subcodes are displayed on the keypad and operation panel.

Restart after Fault

Explains measures for restarting the system after a fault, including manual and automatic resets.

Description of Fault Levels

Categorizes faults into five levels based on severity and outlines handling solutions.

Fault Information and Troubleshooting

Provides detailed information on possible causes and solutions for various fault codes.

Inspection and Maintenance

Daily Maintenance

Outlines daily inspection items for motor, cooling fan, installation environment, load, and input voltage.

Periodic Inspection

Details periodic inspection items for general components, cables, peripheral devices, air filter, and control circuit.

Replacement of Vulnerable Components

Covers replacement of cooling fans and electrolytic capacitors based on service life.

Storage

Provides guidelines for proper storage of the controller to maintain its condition.

Description of Functions and Schemes

Attendant Function

Describes the elevator's behavior in attendant mode, including response to calls and door control.

Fire Emergency Running

Details the system's response to fire emergency signals, including returning to base floor and firefighter operation.

Elevator Lock Function

Explains the elevator lock function, including its behavior when activated and wiring methods.

Full-Load/Overload Function

Describes how the system handles full-load and overload conditions, including indicators and wiring.

Time-based Floor Service

Explains how to set specified service floors for the elevator during certain time periods.

Running Test

Details parameters for commissioning and maintenance tests, including car call and random running tests.

Anti-nuisance Function

Describes how the system identifies and cancels excessive car calls to prevent nuisance.

Disability function

Explains how the disability operation box and hall call box facilitate elevator use for disabled individuals.

VIP Running Function

Describes how the elevator provides prioritized service to VIP persons, including state and wiring.

UCMP Function

Explains the Unintended Car Movement Protection function for safety during motor or drive control system failures.

Braking Force Test Function

Details the function for periodically testing the brake contactor's force and the control system's braking force.

Shorting PMSM Stator Scheme

Explains schemes for shorting PMSM stator phases to restrict elevator car movement and ensure safety.

Automatic Emergency Evacuation Scheme at Power Failure

Covers schemes for emergency evacuation using UPS or ARD during power failure.

Parallel/Group Control Scheme

Describes parallel control for two elevators and group control for multiple elevators using CAN2 and GCB.

Opposite Door Control Scheme

Explains separate control for two doors of an elevator across four different modes.

STO Application Scheme

Details the Safe Torque Off (STO) application scheme using a controller and STO card for safety.

Application Scheme of Emergency Operation and Dynamic Test Device of Equipment-roomless Elevator

Describes the application scheme for emergency operation and dynamic testing of equipment-roomless elevators.

Appendix A Foreign Standards

Important Notes

Provides general notes regarding CE mark compliance and European regulations.

CE Low Voltage Directive Compliance

Details compliance with the Low Voltage Directive and required conditions for integration.

EMC Guidelines Compliance

Explains electromagnetic compatibility and requirements for controller compliance.

Requirements on Cables and Cabling

Outlines requirements for shielded cables, system wiring, and grounding for EMC compliance.

Solutions to Current Leakage

Provides solutions for managing leakage current issues, including ELCB selection and carrier frequency adjustments.

Requirements on residual current device (RCD)

Specifies requirements for RCD selection, considering transient and leakage currents.

Solutions to EMC Interference

Offers solutions for typical EMC interference problems like ELCB tripping and communication interference.

Appendix B Parameter Table

Appendix C Revision History

Warranty Agreement