Inovance Monarch NICE300new Series - Page 34

- 33 -
2 System Commissioning
2
Indicator Indication
TUNE/TC
TUNE
/TC
OFF: no meaning
TUNE
/TC
ON indicates in auto-tuning state.
TUNE
/TC
Blinking: no meaning
RPM
%
A VHz
Hz for frequency
RPM
%
A VHz
A for current
RPM
%
A VHz
V for voltage
RPM
%
A VHz
RPM for motor speed
RPM
%
A VHz
Percentage
Descriptions of Keys
Key Name Function
PRG
Programming
Enter or exit the Level I menu.
Return to the previous menu.
ENTER
Enter
Enter the menu interfaces level by level.
Conrm the parameter setting.
Up
When navigating a menu, it moves the selection up through the screens
available.
When editing a parameter value, it increases the displayed value.
Down
When navigating a menu, it moves the selection down through the screens
available.
When editing a parameter value, it decreases the displayed value.
Shift
Select the displayed parameters in turn in the stop or running state.
Select the digit to be modied when modifying a parameter value
RUN
Run
Start the controller in the operation panel control mode.
Note: It is inactive when the controller is in distance control mode.
STOP
RES
Stop/Reset
Stop the controller when it is in the RUN state.
Perform a reset operation when the AC drive is in the FAULT state.
QUICK
Menu Enter or exit Level-I quick menu.