Inovance Monarch NICE300new Series - Use of the LED Operation Panel

- 32 -
2 System Commissioning
2
2.1.2 Use of the LED Operation Panel
The LED operation panel is connected to the RJ45 interface of the controller by using an 8-core at cable.
You can modify the parameters, monitor the working status and start or stop the controller by operating the
operation panel. The following gure shows the LED operation panel.
Figure 2-3 Diagram of the LED operation panel
MF.K
RUN
STOP
RES
QUICK
PRG ENTER
RUN
LOCAL/REMOT FWD
/REV TUNE/TC
RPM
%
A VHz
Reserved
RUN indicator
Data display
Programming key
RUN key
Menu key
Up/Down indicator
Auto-tuning indicator
Fault hiding key
Stop/Reset key
Shift key
UP key
Down key
Confirm key
Unit indicator
ON: down direction
OFF: up direction
Function Indicators
: ON, : OFF, : blinking
Indicator Indication
RUN
RUN
OFF indicates the STOP status.
RUN
ON indicates the RUNNING status.
LOCAL/REMOT - Reserved
FWD/REV
FWD/REV
OFF indicates elevator in up direction.
FWD/REV
ON indicates elevator in down direction.