‑6‑
General Safety Instructions
Unpacking
● Do not install the equipment if you find damage, rust, or signs of use on the equipment
or accessories upon unpacking.
● Do not install the equipment if you find water seepage or missing or damaged
components upon unpacking.
● Do not install the equipment if you find the packing list does not conform to the
equipment you received.
● Check whether the packing is intact and whether there is damage, water seepage,
dampness, and deformation before unpacking.
● Unpack the package by following the unpacking sequence. Do not strike the package
violently.
● Check whether there is damage, rust, or injuries on the surface of the equipment and
equipment accessories before unpacking.
● Check whether the package contents are consistent with the packing list before
unpacking.
Storage and Transportation
● Large‑scale or heavy equipment must be transported by qualified professionals using
specialized hoisting equipment. Failure to comply may result in personal injuries or
equipment damage.
● Before hoisting the equipment, ensure the equipment components such as the front
cover and terminal blocks are secured firmly with screws. Loosely‑connected
components may fall off and result in personal injuries or equipment damage.
● Never stand or stay below the equipment when the equipment is being hoisted by the
hoisting equipment.
● When hoisting the equipment with a steel rope, ensure the equipment is hoisted at a
constant speed without suffering from vibration or shock. Do not turn the equipment
over or let the equipment stay hanging in the air. Failure to comply may result in
personal injuries or equipment damage.
To Next Page
Loading...
Need help?
General
