10
Product maintenance
If side brushes are dirty, please wash them with clean water and then use them after
they get dry naturally. If they are damaged and cannot work normally, please change
them.
When changing side brushes, please correspond the sign “L” and “R” on the
side brushes to the position “L” and “R” at the bottom of the machine respective-
ly.
Please clean up the dustbin and the suction channel after sweeping every time.
After you press the finger sign of the swiveling cover, the cover will open
automatically.
After taking out the dustbin, please check if the suction channel of the host is
obstructed by foreign matters and also clean it up.
Remove the efficient strainer.
Remove the preliminary strainer.
Lower the dustbin until dust is poured out.
Clean up the dustbin, preliminary strainer and efficient strainer fully. We suggest
cleaning up the efficient strainer once after using it for 15-30 days. The
maximum service life of the efficient strainer is 24 months. The efficient strainer
shall not be cleaned with a brush but shall be blown with a dryer or knocked
slightly by virtue of an external force to make dust fall down. Do not wash it with
water.
Assemble them correctly. Please ensure that the two strainers are assembled
well to avoid damages to the machine.
After the machine finishes sweeping, please wash its side brushes to ensure its
normal operation.
1.
a.
a.
After its components are washed with water, keep them getting dried naturally
but do not dry them under the sunshine. They shall be put into the machine for
use after they are fully dried to avoid affecting functions and life of the machine.
b.
If the preliminary strainer and the efficient strainer are damaged, they shall be
replaced in time to avoid affecting the dust removal result.
c.
A.
B.
C.
D.
E.
F.
G.
b.
! Note:
! Note:
Cleaning of side brushes
2. See the pictures below for cleaning the dustbin and strainer.
To Next Page
Loading...
