27
Insignia 19" LED TV
www.insigniaproducts.com
VGA (good)
1 Make sure that your TV’s AC power adapter is unplugged and the computer is turned off.
2 Connect a VGA cable (not provided) to the VGA jack on the back of your TV and to the VGA jack on the
computer.
3 Connect an audio cable (not provided) to the PC/DVI AUDIO jack on the back of your TV and to the AUDIO OUT
(headphone) jack on the computer.
4 Plug your TV’s AC power adapter into a power outlet, then turn on your TV and the computer.
5 Press INPUT to open the INPUT SOURCE list.
6 Press
S
or
T
to select VGA, then press ENTER.
7 Adjust the display properties on the computer, if necessary.
Audio cable
VGA cable
Back of TV
VGA cable
connector
Audio cable
connector
VGA jack PC/DVI
AUDIO jack
On your TV
To Next Page
Loading...
