54
NS-19E310NA15 Insignia 19" LED TV
www.insigniaproducts.com
Check the digital signal strength
You can check the digital signal strength to
determine if you need to adjust your antenna or
digital cable input. The higher the signal strength,
the less likely you are to experience picture
degradation.
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight CHANNELS, then press
T
or ENTER. The CHANNELS menu opens.
3 Press
S
or
T
to highlight Channel Strength,
then press ENTER. The Channel Strength screen
opens showing the signal strength meter.
4 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Set parental controls
Parental controls let you prevent your children from
watching inappropriate material on TV. When set,
parental controls read the rating of the program
(with some exceptions, such as news and sports)
and deny access to programs that exceed the
ratings level you select. To watch programs that
exceed the selected rating, you must enter a
password.
Set or change the password
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
3 Press
S
or
T
to highlight Parental Controls,
then press ENTER. The Enter password screen
opens.
4 Press the number buttons to enter the four-digit
password. The default password is 0000. You
should change the password to a number you
can remember. The SETTINGS · PARENTAL
CONTROLS menu opens.
5 Press
S
or
T
to highlight Change Password,
then press ENTER. The SETTINGS · PARENTAL
CONTROLS · CHANGE PASSWORD screen opens.
6 Press the number buttons to enter a password,
then enter the password again. A message tells
you that the password has been changed.
7 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Note
If you forget your password, enter 9999.
To Next Page
Loading...
Need help?
General