27
Insignia 24" LED TV
www.insigniaproducts.com
Using VGA (most common)
To connect a computer using VGA:
1 Make sure that your TV’s AC power adapter is unplugged and the computer is turned off.
2 Connect a VGA cable (not provided) to the VGA jack on the back of your TV and to the VGA jack on the
computer.
3 Connect an audio cable with a stereo mini plug (not provided) to the PC/DVI AUDIO IN jack on the back of your
TV and to the AUDIO OUT (headphone) jack on the computer.
4 Plug your TV’s AC power adapter into a power outlet, then turn on your TV and the computer.
5 Press INPUT to open the INPUT SOURCE list.
6 Press
S or T to select VGA, then press ENTER.
7 Adjust the display properties on the computer, if necessary.
Audio cable
with a stereo
mini plug
VGA cable
Back of TV
VGA cable
connector
Audio cable
with stereo
mini plug
VGA jack PC/DVI
AUDIO IN
jack
On your TV
To Next Page
Loading...
Need help?
General