30
NS-24E40SNA14 Insignia 24" LED TV
www.insigniaproducts.com
Connecting a basic home theater system
Using digital audio
To connect a basic home theater system or sound bar using digital audio:
1 Make sure that your TV’s AC power adapter is unplugged and the home theater system or sound bar is turned
off.
2 Connect a digital coaxial audio cable (not provided) to the DIGITAL OUTPUT (COAXIAL) jack on the side of your
TV and to the optical AUDIO IN jack on the digital home theater system or sound bar.
3 Plug your TV’s AC power adapter into a power outlet, then turn on your TV.
4 Turn on the home theater system or sound bar, then set it to the correct source mode. For more information, see
the documentation that came with the home theater system or sound bar.
5 On your TV, set the Digital Audio/SPDIF option on the AUDIO menu to PCM. See “Adjusting sound settings” on
page 43.
Digital coaxial audio cable
Home theater system
Side of TV
Digital coaxial
audio cable
connector
Digital coaxial
audio jack
On your TV
To Next Page
Loading...
