27
24"/32" 720P, 48" 1080P, 60Hz, LED Roku TV
www.insigniaproducts.com
48" model
1 Make sure that your TV’s power cord is unplugged and all connected devices are turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect a coaxial cable (not provided) to the ANT/CABLE IN jack on the side of your TV and to the coaxial out jack
on the cable or satellite box.
4 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Set up the TV tuner to watch broadcast TV. See Setting up Antenna TV on page 61.
6 On the Home screen, press or to highlight the Antenna TV tile, then press OK.
Note
If your TV is the 24" or 32" model, go to 24" or 32" model on page 24.
Cable or
satellite box
Coaxial cable
Side of TV
Coaxial cable
connector
ANT/CABLE IN
jack
On your TV
Cable
wall jack
To Next Page
Loading...
