Insignia NS-24ER310NA17 - AV (Good); 24 or 32 Model

32
NS-24ER310NA17/NS-32DR310NA17/NS-48DR510NA17
www.insigniaproducts.com
AV (good)
24" or 32" model
1 Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect an AV cable (not provided) to the VIDEO jack and AUDIO L and R jacks on the back of your TV and to the
AV OUT jacks on the DVD or Blu-ray player.
3 Plug your TV’s power cord into a power outlet, then turn on your TV and DVD or Blu-ray player.
4 On the Home screen, press or to highlight the AV tile, then press OK.
Note
Cables are often color-coded to match color-coded jacks.
Note
If your TV is the 48" model, go to 48" model on page 33.
Note
Images do not necessarily represent the exact design of your television.
Note
When you connect the audio using the AUDIO L and R jacks, the audio
output is analog.
AV cable
Side of TV
AV cable
connector
AV jack
Audio cable
connectors
Analog
audio jacks
DVD or Blu-ray
player
On your TV