Insignia NS-29LD120A13 User Manual (English)

Other manuals for Insignia NS-29LD120A13

User Guide55 pages

Guía De Instalación Rápida2 pages

Important Information8 pages

Información Importante8 pages

Product Specifications2 pages

Guía Del Usuario62 pages

Guide D'Installation Rapide2 pages

Quick Setup Guide2 pages

Questions and Answers:

B
Brenda AllenSep 12, 2025
Why are some channels not showing up on my Insignia TV DVD Combo?
- K
  Katelyn JonesSep 12, 2025
  If one or more channels do not display on your Insignia TV/DVD combo, make sure that the channels are not blocked. Make sure that the channels are not hidden; the channel may have been deleted from the channel list. You can tune to the channel by pressing the number buttons or you can add the channel back to the channel list. If you are using a cable or satellite box, use the remote that came with that box to change channels. Make sure that you have the correct input selected to view channels from the cable or satellite box. If you are using an antenna, the digital channel signal may be low.
J
Joshua BrownAug 25, 2025
Why is my Insignia TV DVD Combo remote not working?
- J
  Judy Nichols MDAug 25, 2025
  If the remote control for your Insignia TV/DVD combo isn't working, ensure the power cord is correctly connected to both the TV/DVD combo and the power outlet. Remove any obstructions between the remote and the sensor on the front of the unit, and point the remote directly at the sensor. Also, make sure you've removed all plastic wrapping from the batteries, that the batteries are installed correctly, and replace them if necessary.
T
Tracey CrawfordAug 25, 2025
What to do if my Insignia TV DVD Combo says no signal?
- C
  Connie MillerAug 26, 2025
  If your Insignia TV/DVD combo displays a “No signal” error message, press the INPUT button to ensure you've selected the correct input for the device or service you're trying to use. If you're using a cable or satellite box, use its remote to change channels and make sure you've selected the correct input to view channels from that box.
J
johnstonsethAug 26, 2025
How to fix Insignia TV DVD Combo with no power?
- M
  Megan TerryAug 26, 2025
  If your Insignia TV/DVD combo has no power, ensure that the power cord is properly connected to both the TV/DVD combo and a working power outlet. If it's still not working, unplug the power cord, wait 60 seconds, then plug it back in and turn on the TV/DVD combo. Also, check for interference from other devices; try turning off nearby electronics like surround sound receivers, external speakers, fans, or hair dryers, one at a time, to see if any are causing the issue. If you find one that's interfering, move it further away from the TV/DVD combo.
K
Katherine HallAug 27, 2025
Why does my Insignia TV DVD Combo have picture but no sound?
- S
  samanthamendezAug 27, 2025
  If your Insignia TV/DVD combo has good picture but no sound, first increase the volume and make sure that the sound is not muted. Ensure that headphones are not connected, as this will mute the TV/DVD combo speakers. Also, verify that the correct audio mode is selected and that the audio cables are connected correctly and securely. Finally, ensure that the antenna or cable TV is connected correctly and securely. If you are using an antenna, the digital channel signal may be low. Also, the audio cable(s) you are using may be bad, so try a new set.
D
Daniel BakerSep 12, 2025
How to start slideshow on Insignia TV DVD Combo?
- B
  barrygreenSep 12, 2025
  If slideshow does not start on your Insignia TV/DVD combo, make sure that you select slideshow when you are in thumbnail mode.
K
Kimberly MillsSep 8, 2025
How to prevent after images on Insignia TV DVD Combo?
- D
  Diana PruittSep 8, 2025
  To prevent after images from appearing on your Insignia TV/DVD combo, do not display a still image, such as a logo, game, or computer image, for an extended period of time. This can cause a permanent after-image to be burned into the screen. This type of damage is not covered by your warranty.
S
Sandra FlemingSep 9, 2025
Why are photos not displaying on my Insignia TV DVD Combo?
- T
  Tina AndersonSep 9, 2025
  If photos are not displayed on your Insignia TV/DVD combo, make sure that your USB flash drive is connected securely to the USB jack on the back of your TV. Press INPUT and make sure that USB (Photos) is selected. Make sure that the photos on the USB flash drive are JPEG image files with “.jpg” as the file extension.
M
Michele ColemanSep 3, 2025
How to fix double image on Insignia TV DVD Combo?
- G
  garciajenniferSep 3, 2025
  If your Insignia TV/DVD combo displays double images, use a highly directional outdoor antenna, cable TV, or satellite TV.
H
holmessamuelSep 1, 2025
How to adjust screen size on Insignia TV DVD Combo?
- J
  Jose MartinSep 1, 2025
  If the picture on your Insignia TV/DVD combo does not fill the screen and there are black bars around the picture, change the aspect ratio. An increasing amount of digital TV and movies are presented in wide screen (16:9).

Insignia NS-29LD120A13 Specifications

General

Screen Size	29 inches
Resolution	1366 x 768
Display Technology	LED
DVD Player	Yes
HDMI Ports	2
USB Ports	1
Refresh Rate	60 Hz
Display Type	LCD
HDMI Inputs	2
Built-in Tuner	ATSC/NTSC