Insignia NS-32D220NA16 - Connecting a Computer

24
Insignia 32" 720p 60Hz LED TV
www.insigniaproducts.com
Connecting a computer
1 Make sure that your TV’s AC power adapter is unplugged and the computer is turned off.
2 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side of your TV and to the HDMI OUT jack on
the computer.
3 Plug your TV’s AC power adapter into a power outlet, then turn on your TV and the computer.
4 Press INPUT to open the INPUT SOURCE list.
5 Press
S or T to highlight HDMI1 or HDMI2, then press ENTER.
6 Adjust the display properties on the computer, if necessary.
HDMI cable
Side of TV
HDMI cable
connector
HDMI jack
On your TV