Insignia NS-32D220NA16 - Displaying INlink-Compatible Devices; Selecting an INlink-Compatible Device

40
Insignia 32" 720p 60Hz LED TV
www.insigniaproducts.com
Displaying a list of INlink-compatible devices
You can display a list of HDMI CEC devices that are
connected to your TV.
1 Press MENU.
2 Press
W or X to highlight SETTINGS, then press T
or ENTER.
3 Press
S or T to highlight INlink, then press ENTER
or
X.
4 Press
S or T to highlight INlink Device List, then
press ENTER or
X. A list of the HDMI
CEC-compatible devices you have connected
appears.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Selecting an INlink-compatible device
When you have more than one INlink-compatible
device connected, you can select the device you want
to use.
You can also open an INlink-compatible device’s root
menu.
1 Press MENU.
2 Press
W or X to highlight SETTINGS, then press T
or ENTER.
3 Press
S or T to highlight INlink, then press ENTER
or X.
4 Press
S or T to highlight Connect, then press
ENTER or
X.
5 Press
S or T to highlight the device you want to
connect to, then press ENTER.
6 Press
S or T to select an option. You can select:
• Connect—Wake (turn on) the device if it is in
standby mode or returns to the device if you
have switched to a different video input mode.
• Root Menu—Open the device’s root menu, then
use your TV’s remote control to control the
device, if the device has this feature.
7 Press MENU to return to the previous menu, or
press EXIT to close the menu.