Insignia NS-32E320A13A

Other manuals for Insignia NS-32E320A13A

User Manual61 pages

Important Information8 pages

Quick Setup Guide2 pages

Brochure2 pages

Guide D'Installation Rapide2 pages

Questions and Answers:

V
vroweSep 2, 2025
How do I fix one or more Insignia NS-32E320A13A channels that do not display?
- C
  Christine WilliamsSep 2, 2025
  If one or more channels do not display on your Insignia TV, make sure that the channels are not blocked or hidden. If you are using a cable or satellite box, use the remote that came with that box to change channels and make sure that you have the correct input selected to view channels from the cable or satellite box. If you are using an antenna, the digital channel signal may be low.
G
gabrielabranchAug 31, 2025
What to do if there are no channels after auto channel search on Insignia TV?
- C
  Collin FreemanAug 31, 2025
  If there are no channels after running the auto channel search on your Insignia TV, contact your cable or satellite TV provider. Make sure the antenna or cable/satellite TV is connected securely to your TV and try replacing the cable between the antenna/cable or cable/satellite box and your TV.
M
Mary MaddenAug 29, 2025
Why are the control buttons not working on my Insignia NS-32E320A13A?
- G
  Gavin CarrAug 29, 2025
  If the control buttons on your Insignia TV are not working, make sure that the Button Lock option is set to Off. If that doesn't work, unplug the power cord, wait a few seconds, then plug the cord back in and turn on your TV.
J
Jeffrey StevensAug 28, 2025
What to do if my Insignia NS-32E320A13A has no power?
- V
  Veronica WhitneyAug 28, 2025
  If your Insignia TV has no power, make sure that the power cord is correctly connected to your TV and a power outlet. If it is, unplug the power cord, wait 60 seconds, then plug the cord back in and turn on your TV. Other devices may be interfering with your TV, so try turning off one device at a time to determine which device is causing interference.
M
Michael BentleyAug 26, 2025
What causes no sound on my Insignia NS-32E320A13A but the picture is good?
- A
  Aaron McleanAug 27, 2025
  If you have a good picture but no sound on your Insignia TV, first, increase the volume. Ensure that the sound is not muted and that headphones are not connected. Make sure the correct audio mode is selected and that the audio cables are securely connected to your TV. Also, ensure the antenna or cable TV is connected correctly and securely. If you are using audio cables, they may be faulty, so try a new set.
A
abakerAug 25, 2025
What to do if my Insignia TV shows a 'no signal' error?
- J
  Jeffrey CookAug 25, 2025
  If your Insignia TV displays a 'no signal' message, press the INPUT button and select the correct input for your device or service. If using a cable or satellite box, use the remote that came with the box to change channels and make sure that you have the correct input selected to view channels from the cable or satellite box.
M
Miss Nicole Dunn MDAug 22, 2025
How to fix Insignia TV remote control not working?
- W
  williamscodyAug 22, 2025
  If your Insignia TV remote isn't working, ensure the power cord is correctly connected to both the TV and the power outlet. Check for any obstructions between the remote and the TV's sensor. Point the remote directly at the sensor. If the batteries are wrapped in plastic, remove it. Make sure the batteries are installed correctly or replace them with new ones if they're dead.

Insignia NS-32E320A13A Specifications

General

Screen Size	32 inches
Display Type	LED
Refresh Rate	60Hz
HDMI Ports	2
USB Ports	1
Smart TV	No
Inputs	HDMI, USB, Composite, RF
Resolution	1366 x 768
Dimensions (W x H x D)	28.9 x 17.2 x 3.2 inches