Insignia NS-32L120A13 - Page 17

13
Insignia 32"/46" LCD TV
www.insigniaproducts.com
Using composite video (good)
To connect a cable or satellite box using
composite video:
1 Make sure that your TV’s power cord is
unplugged, and all connected equipment is
turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect an A/V cable (not provided) to the
AV IN VIDEO jack and L/R AUDIO jacks on the
side of your TV and to the composite video and
audio out jacks on the cable or satellite box.
NS-32L120A13/NS-32L240A13
NS-46L240A13
4 Plug your TV’s power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
5 Go through the Setup Wizard on page 26
.
Note
•The AV IN VIDEO jack shares the audio jacks
with the COMPONENT IN video jacks.
• When you connect the audio using the
L/RAUDIO jacks, the audio output is analog.
IN
HDMI 2
ANT/
CABLE IN
DIGITAL
OUTPUT
USB
(ARC)
HDMI 1
(DVI)
(COAXIAL)
VIDEO
AUDIO
L
R
COMPONENT
IN
P
B
P
R
Y
AV IN
Cable or satellite box
A/V cable
Cables are often color-coded
to match color-coded jacks.
Note: The yellow video
connector on the AV cable
connects to the green
AV IN VIDEO jack.
Side of TV
I
N
HDMI 3
ANT/
CABL E IN
DIGITAL
OUTPUT
USB
HDMI 1
(DVI)
(COAXIAL)
VIDEO
AUDIO
L
R
COMPON ENT
IN
P
B
P
R
Y
AV IN
HDMI 2
(ARC)
Cables are often color-coded
to match color-coded jacks.
Note: The yellow video
connector on the AV cable
connects to the green
AV IN VIDEO jack.
Side of TV
AV cable
Cable or satellite box