Insignia NS-32E859A11 - User Manual

14
www.insi
g
nia
p
roducts.com
Getting Started NS-32E859A11/NS-42E859A11
Remote control
# Button Description
(power)
Press to turn on your TV. Press again to put your TV in standby mode.
When your TV is in standby mode, power still flows through it. To
completely disconnect power, unplug the power cord.
DVD
Press to control a DVD player. You must program the remote control
before this button works. For more information, see “Programming your
universal Insignia remote control” on page 27.
TV Press to put the remote in TV mode.
APPS Press to open the Apps screen in the on-screen menu.
TiVo Press to open the on-screen menu.
GUIDE
Press to open the program guide. For more information, see “Displaying
additional information” on page 35.
SELECT Press to confirm selections or changes.
! " # $
Press to move left, right, up, or down in on-screen menus.
ZOOM
Press to select the aspect ratio. For more information, see “Adjusting the
video settings” on page 40.
EXIT Press to close the on-screen menu.
(thumbs down)
Press to decrease the thumbs rating by 1 thumb.
In the channel list, press to remove a highlighted channel from the
favorite list.
In the on-screen keyboard, press to switch to lowercase letters.
VOL+/VOL– Press to increase or decrease the volume.
FAV
Press to open the favorite channel list. For more information, see
“Setting up the channel and favorite channel lists” on page 63 and
“Viewing a favorite channel” on page 64.
MUTE Press to mute the sound. Press again to restore the sound.
/SLOW
Press to enter slow motion playback in TV VOD mode (watching Netflix
and CinemaNow) or when using a DVD player, Blu-ray player, or DVR. For
more information, see “Programming your universal Insignia remote
control” on page 27.
Press to turn the video window on or off. For more information, see
“Turning the video window on or off” on page 43.
(replay)
Press to jump back eight seconds in TV VOD mode (watching Netflix and
CinemaNow) or when using a DVD player, Blu-ray player, or DVR. For
more information, see “Programming your universal Insignia remote
control” on page 27.
(pause)
Press to pause playback in TV VOD mode (watching Netflix and
CinemaNow) or when using a DVD player, Blu-ray player, or DVR. For
more information, see “Programming your universal Insignia remote
control” on page 27.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17

Insignia NS-32E859A11 Specifications

General

Screen Size	32 inches
Display Type	LCD
Resolution	1366 x 768
Refresh Rate	60Hz
HDMI Ports	2
USB Ports	1
Wi-Fi	Yes
Smart TV	Yes
Aspect Ratio	16:9
Inputs	Composite
Sound Output	10W (2 x 5W)

Summary

Remote Control Overview

Button Descriptions

Detailed explanations for each button on the remote control.

Using the Remote Control

Installing Remote Control Batteries

Step-by-step guide to insert batteries into the remote.

Connecting the Power

Instructions on how to connect the TV's power cord to an outlet.

Turning on your TV for the first time

Initial Setup Wizard

Guide to the first-time setup process using the on-screen wizard.

Initial TV Setup Steps

Network and Channel Setup

Instructions for connecting to the network and scanning for channels.

Universal Remote Control Programming

Programming Mode Buttons

Device and Remote Control Setup

Remote Control Settings Management

Resetting Remote Settings

Understanding TV Basics

Z-Wave Remote Control Setup

Adding Remote to Z-Wave Network

Process to pair the remote with the TV using Z-Wave technology.

Z-Wave Communication Management

Toggling IR and RF Communication

Removing Remote from Z-Wave Network

Resetting Z-Wave Network

How to reset the TV's Z-Wave network to factory defaults.

Advanced Remote Control Programming

Programming Learned Buttons

Teaching the remote new functions from original device remotes.

Macro Programming and Deletion

Programming Macros