roducts.com
103
NS-32E859A11/NS-42E859A11 Appendix
Toggling between IR and RF communication
Once your remote control is added to the TV ZWave network,
you can use Z-Wave RF communication to control your TV.
However, you can also switch to IR communication, which
requires you to point the remote control toward the remote
control sensor when you try to control your TV.
RF communication with your TV does not require you to point
the remote control toward the remote control sensor on the
front of your TV. Also your remote control and TV can talk to
each other which will help with setting up your Insignia
Universal remote to work with other home theater devices.
To toggle between IR and RF communication:
• If you are using RF communication, press and hold and
EXIT at the same time. The remote control switches to IR
mode and the LED blinks four times.
• If you are using IR communication, press and hold and EXIT
at the same time. The remote control switches to RF mode
and the LED blinks twice.
Removing your remote control from the TV
Z-Wave network
To remove your remote control from the TV Z-Wave
network
(TV as Primary Controllor):
1 Press and hold VOL and VOL on the front of your TV at
the same time. The Remove a Z-WAVE Device screen opens.
2 Press and hold and on the remote control for about five
seconds. The Z-Wave Device Removed screen opens.
3 Press SELECT to complete the removal. The remote control
is removed from the TV Z-Wave network, and RF
communication is not available.
Resetting your TV Z-Wave network
To reset your TV Z-Wave network:
1 Press and hold VOL , VOL , and CH on the front of
your TV at the same time. The Reset Z-Wave Network? screen
opens.
2 Press ! or " to highlight Reset Z-Wave Network, then press
SELECT.
Remove a Z-WAVE Device?
Press any button on the TV to cancel.
Go to your Z-Wave device and follow the instructions to
remove it from your Z-Wave network.
Note
• To enable RF communication, you have
to add the remote control to the Z-Wave
network again.
• To remove other Z-Wave devices from
your TV ZWave network, perform Step 1
above, then follow the instructions in
the user manual of that device to
complete the removal.
Reset Z-Wave Network?
Cancel
Reset Z-Wave Network
Warning: this will reset your Z-Wave network, and any
devices you wish to use will need to be added again.
To Next Page
Loading...
Need help?
General