Insignia NS-32L430A11 User Manual (English)

Other manuals for Insignia NS-32L430A11

Guía Del Usuario64 pages

Quick Setup Guide2 pages

Guide De L'Utilisateur64 pages

Guide D'Installation Rapide2 pages

Guía De Instalación Rápida2 pages

Questions and Answers:

M
Melissa WhiteJul 30, 2025
How to fix no picture or sound on Insignia NS-32L430A11?
- S
  Sara HansenJul 30, 2025
  If your Insignia LCD TV screen is black and there's no sound, ensure the power cord is properly plugged into the power outlet. Press the power button. Try changing channels in case the problem is with the TV station. Press the INPUT button to select a different video source. Adjust the brightness and color saturation. Make sure the antenna or cable TV is correctly connected. Adjust the antenna, and move the TV away from noise sources like cars or hair dryers. Consider using a highly directional outdoor antenna or switching to cable or satellite TV. Note that a few bright or dark dots on an LCD screen are normal and don't affect the TV's operation.
J
John KingAug 4, 2025
Why is there good picture but no sound on my Insignia NS-32L430A11?
- R
  Renee WeeksAug 5, 2025
  If your Insignia LCD TV shows a good picture but has no sound, first increase the volume. If that doesn't work, press the MUTE button to ensure the sound isn't muted. Also, check that the audio mode is set to Stereo or Mono. Finally, move any radio frequency communication equipment, like a cordless phone, away from the TV.
M
Mark GilesAug 9, 2025
What to do if Insignia LCD TV remote control does not work?
- T
  Terri KruegerAug 9, 2025
  If your Insignia LCD TV remote control isn't working, first ensure there are no obstructions between the remote and the sensor on the TV's front. Clean the remote sensor. Bright or fluorescent lighting may interfere with the signal, so try turning off the light or moving the TV. Replace the batteries, making sure the + and – symbols align correctly in the battery compartment. As an alternative, you can purchase a separate learning remote control.
A
Alison WalkerAug 14, 2025
What to do if buttons do not work on Insignia NS-32L430A11 LCD TV?
- L
  lewisrebeccaAug 14, 2025
  If your Insignia LCD TV buttons are not working, unplug the power cord for a few seconds, then plug it back in and turn on the TV. Also, make sure that the Button Lock option is set to Off.
T
Trevor MooreAug 19, 2025
Why Insignia LCD TV cannot tune to channels?
- K
  Kayla DavisAug 19, 2025
  If you cannot tune to one or more channels on your Insignia LCD TV, it might be because the program is blocked through the parental controls, or the channel may have been skipped from the channel list. You can tune to the channel by pressing the number buttons or add the channel back to the channel list. Also, if a setting or option is grayed out, it is not available in the current video input mode.
D
deborah93Aug 25, 2025
Why is my Insignia LCD TV cabinet creaking?
- M
  Michelle HowardAug 25, 2025
  The creaking noise from your Insignia LCD TV cabinet is normal. When the TV is on, the temperature inside the cabinet increases, causing the cabinet to expand or contract, which produces the creaking noise. This is not a malfunction.

Insignia NS-32L430A11 Specifications

General

Screen Size	32 inches
Display Type	LCD
Resolution	1366 x 768
Refresh Rate	60Hz
HDMI Ports	3
USB Ports	1
Sound Output	20W
Audio Output	Digital Optical
Inputs	HDMI, USB, Composite, RF