8
Insignia 40" 1080p 60Hz LED TV
www.insigniaproducts.com
3 Insert four provided spacers into the mount screw holes on the back of your TV.
4 Attach the wall-mount bracket to your TV using either the four provided M6 × 30 mm screws or the screws that
came with the wall-mount bracket. See instructions that came with the wall-mount bracket for information about
which screws to use and how to correctly hang your TV.
Notes
• The length of the wall-mount screws vary depending on the wall-mount
bracket you purchased. See the instructions that came with the
wall-mount bracket for screw lengths. The wall-mount screws must be
at least 9.5 mm in length.
• The mounting holes on the back of your TV take type M6 screws.
7.87 in. (200 mm)
7.87 in. (200 mm)
To Next Page
Loading...
