Insignia NS-40D420NA16 - Restoring Settings to the Defaults

60
Insignia 40" 1080p 60Hz LED TV
www.insigniaproducts.com
4 Press S or T to highlight Date/Time, then press
ENTER.
5 Press
S or T to highlight Mode, then press ENTER
or
X.
6 Press
S or T to highlight Manual (to set the
options manually) or Auto (the options are
automatically set by the TV signal source), then
press ENTER.
7 Press
S or T to highlight Time Zone, then press
ENTER or X.
8 Press
S or T to select your time zone, then press
MENU. You can select Eastern, Central,
Mountain, Pacific, Alaska, Hawaii, Atlantic, or
Newfoundland.
9 If your viewing area observes Daylight Saving
Time, press
S or T to highlight Daylight Saving,
then press ENTER.
10 Press
S or T to select On or Off, then press MENU
to close the menu.
11 If you selected Manual for Mode, press
S or T to
highlight Date, then press ENTER. Press W or X to
highlight Month, Day, or Ye a r, then press X to
access the setting. Press
S or T to adjust the
setting, then press MENU.
12 If you selected Manual for Mode, press
S or T to
highlight Time, then press ENTER. Press W or X to
highlight the Hour, Minute, or the AM/PM field.
Press
S or T to adjust the setting. When you are
finished, press MENU.
13 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Setting the sleep timer
You can specify the amount of time before your TV
automatically turns off.
1 Press MENU.
2 Press
W or X to highlight SETTINGS, then press T
or ENTER.
3 Press
S or T to highlight Time, then press ENTER
or
X.
4 Press
S or T to highlight Sleep Timer, then press
ENTER or
X.
5 Press
S or T to select the amount of time before
your TV turns off automatically. You can select Off,
5, 10, 15, 30, 60, 90, 120, 180, or 240 minutes.
To turn off the sleep timer, select Off.
6 Press ENTER, MENU, or
W to return to the previous
menu, or press EXIT to close the menu.
Note
You can also press SLEEP to set the sleep
timer.