Insignia NS-40D420NA16 - Installing a Wall-Mount Bracket; Warnings

7
NS-40D420NA16/NS-40D420MX16 Insignia 40" 1080p 60Hz LED TV
www.insigniaproducts.com
Installing a wall-mount bracket
1 Carefully place your TV face-down on a cushioned, clean surface to protect the screen.
2 If the TV stand is installed, remove the four screws that secure the stand column to your TV.
Warnings
• Your TV has four VESA mounting holes on the back. If you attach a
wall-mount bracket to the back of your TV, the bracket must be
securely attached, using all four holes. If you do not use all four
mounting holes, your TV may fall and cause property damage or
personal injury. See the documentation that came with your wall mount
for complete mounting instructions.
• This TV is intended to be supported by a UL Listed wall mount bracket
with suitable weight/load. (See Miscellaneous on page 71.)