15
www.insigniaproducts.com
When the search is complete, the Set the Clock
Mode screen appears.
8 Press ENTER, then press or to highlight
Auto (to automatically set the time using time
information from a digital channel) or Manual
(to manually set the time), then press ENTER.
If you select Auto, the Set to daylight saving time
screen appears.
If you select Manual, the Set current date and
time screen appears. For instructions on how to
manually set the time, see “Setting the clock” on
page 34.
9 If you selected Auto, press or to highlight:
• Off—Turns off the daylight saving time
feature.
• On—Turns on the daylight saving time
feature.
• Auto—Sets the daylight saving time feature
based on the time information from a digital
channel.
10 Press ENTER. The Set the time zone screen
appears.
11 Press or to highlight a time zone, then press
ENTER. If you receive a digital channel signal,
the time zone is selected automatically.
12 Press ENTER. The Enjoy your TV screen opens.
13 Press ENTER. Your TV is ready to use.
Understanding the basics
Turning your TV on or off
To turn your TV on and off:
1 Make sure that the power cord is connected to
your TV and a surge protector or power outlet. If
you are using a surge protector, make sure that
it is turned on.
2 Press (power) to turn on your TV.
3 Press (power) again to turn off your TV. Your
TV goes into Standby mode.
Selecting the video input source
To select the video input source:
• Press INPUT one or more times to select:
•TV
•AV
•Component1
•Component2
•HDMI1/DVI
•HDMI2
You can also select the video input source in the
on-screen menu.
Plug & Play
Sets the Clock Mode.
Clock Mode : Auto
Plug & Play
Sets the Clock Mode.
Clock Mode : Auto
Auto
Manual
Plug & Play
Newfoundland
Atlantic
Eastern
Central
Mountain
Pacific
▼
Note
If you want to reset the Plug & Play option, see
“Resetting the Plug & Play option” on page 38.
Note
Unless otherwise noted, all tasks in this section are
based on using the remote control.
Warning
When you turn off your TV, power still flows into it. To
completely disconnect power, turn off the surge
protector or unplug the power cord.
OK
Plug & Play
Enjoy your TV.
NS-42P650A11-NS-50P650A11_09-1156_MAN_V1_English.book Page 15 Monday, January 18, 2010 11:01 AM
To Next Page
Loading...
