Insignia NS-42P650A11 - TV Software and Reset Options; Upgrading TV software; Resetting settings to defaults

To Next Page

To Previous Page

www.insigniaproducts.com

4 Press OPTIONS to access the list of options. The

Edit Name screen opens.

5 Press or to select the label you want, then

press ENTER.

Resetting the Plug & Play option

If you want to re-run the initial setup wizard to set

up your TV again, you can reset the Plug & Play

option.

To reset the Plug & Play option:

1 Press MENU. The on-screen menu opens.

2 Press or to highlight Setup, then press

ENTER to access the Setup menu. Plug & Play is

highlighted.

3 Press ENTER to reset the Plug & Play option.

Resetting settings to the defaults

To reset settings to the defaults:

1 Press and hold EXIT until the Resets all settings to

the default values screen opens.

2 Select OK to reset the settings.

Upgrading TV software

If upgrades become available for your TV, you can

use a USB flash drive to upgrade your TV’s software.

To upgrade TV software:

1 Download the software upgrade and copy it to a

USB flash drive.

2 Write down all the settings you have changed in

the on-screen menus. During the upgrade, all

settings are reset to the factory defaults.

3 Plug the USB flash drive into the SERVICE jack

on the back of your TV.

4 Press MENU. The on-screen menu opens.

Edit Name

Component1

Component2

HDMI1/DVI

HDMI2

----

VCR

DVD

Cable STB

Satellite STB

PVR STB

Mode : Standard

Contrast : 95

Brightness : 45

Sharpness : 50

Color : 50

Tint (G/R)

Picture Options

: G50/R50

Picture

Sound

Channel

Setup

Input

Resets all settings to the default values.

Cancel