37
www.insigniaproducts.com
• Repeat—Sets the repeat mode for the timer.
You can set the timer to activate once or on
one or more days of the week. After you select
a day of the week, press ENTER. A check mark
appears in the box below the day.
6 Press RETURN to return to the previous menu or
EXIT to close the menu.
Adjusting menu settings
Selecting the menu language
To select the menu language:
1 Press MENU. The on-screen menu opens.
2 Press or to highlight Setup, then press
ENTER to access the Setup menu.
3 Press or to highlight Language, then press
ENTER to access the option.
4 Press or to highlight a language, then press
ENTER to confirm. You can select English,
French, or Spanish.
5 Press RETURN to return to the previous menu or
EXIT to close the menu.
Labeling an input source
To change input labels:
1 Press MENU. The on-screen menu opens.
2 Press or to highlight Input, then press
ENTER to access the Input menu.
3 Press or to highlight Edit Name, then press
ENTER.
Note
If the timer turns on your TV and no controls or
buttons are used for three hours, your TV
automatically turns off to prevent over-heating.
Note
Unless otherwise noted, all tasks in this section are
based on using the remote control.
Mode : Standard
Contrast : 95
Brightness : 45
Sharpness : 50
Color : 50
Tint (G/R)
Picture Options
: G50/R50
Picture
Sound
Channel
Setup
Input
Channel
Setup
Input
Plug & Play
Language : English
Time
Game Mode : Off
V-Chip
Caption
Energy Saving : Off
Channel
Setup
Input
Plug & Play
Language : English
Time
Game Mode : Off
V-Chip
Caption
Energy Saving : Off
Software Upgrade
Mode : Standard
Contrast : 95
Brightness : 45
Sharpness : 50
Color : 50
Tint (G/R)
Picture Options
: G50/R50
Picture
Sound
Channel
Setup
Input
Setup
Input
Source List
Edit Name
NS-42P650A11-NS-50P650A11_09-1156_MAN_V1_English.book Page 37 Monday, January 18, 2010 11:01 AM
To Next Page
Loading...
