14
NS-AC8PWH8
www.insigniaproducts.com
Setting up your portable air conditioner
Remove and store (optional) packing materials for reuse. Remove any
shipping tape before using the air conditioner. Remove tape residue with
liquid dish soap and a damp cloth. Do not use sharp tools, alcohol,
thinners, or abrasive cleaners to remove adhesive, which could damage
the finish.
Placing your air conditioner
Place the unit on a flat, dry area near a window, so you can use the hose
and adapter to connect the air conditioner to the window installation kit
in order to vent the exhaust air outside.
To maintain good air circulation and optimum machine performance,
leave a 20 in. (50 cm) space around it.
Notes
• Do not remain in the direct airflow from the air conditioner
for extended periods.
• When used at the same time as stoves, fireplaces, or other
combustion/heating devices, make sure that there is
sufficient flow of fresh air into the room. Do not use in
tightly closed spaces with these types of devices.
• This air conditioner is intended for household use as a
consumer comfort appliance. Do not use it as a precision
climate control system for the purpose of cooling precision
equipment, food, pets, plants, artwork, and so on. Such
items could be damaged.
• Do not bend the hose downward when the window
installation kit is not being used. Doing so may cause
inferior performance or failure of the air conditioner.
Note
The AC units shown in the following graphics are for instructive
purposes only, and may not look like your specific unit.
20 in. (50 cm)
20 in. (50 cm)
NS-AC8PWH8_16-1094_MAN_V1_ENG.fm Page 14 Friday, March 10, 2017 3:43 PM
To Next Page
Loading...
