26
NS-AC8PWH8
www.insigniaproducts.com
Emptying the water collection tank
When the internal water collection tank is full, “FL” appears on the LED
display and your air conditioner turns off until the tank is emptied.
1 Unplug your air conditioner, then disconnect the exhaust hose from
the back.
2 Move your air conditioner to a location where a suitable drain is
available or place a drain pan under the unit that is capable of holding
up to 1.3 pints (0.6 liters) of water.
3 Remove the plug cover and the rubber plug from the drain outlet and
allow the water to drain from the unit.
4 After you have drained the water collection tank, replace the rubber
plug and plug cover, making sure that the cover is secure.
5 Place the air conditioner in the desired location, reconnect the exhaust
hose, then plug it in.
Storing your air conditioner
If your air conditioner will not be used for an extended period of time, we
suggest that you prepare it for storage by doing the following:
1 Unplug your air conditioner.
2 Remove the rubber plug and drain the water collection tank
completely.
3 Reinstall the rubber plug.
Notes
• When operating or draining water from your air
conditioner, always protect carpeting and floors from
possible water spillage.
• When you drain the water from your air conditioner, be sure
to wipe up any spilled water with a dry cloth or towel.
NS-AC8PWH8_16-1094_MAN_V1_ENG.fm Page 26 Friday, March 10, 2017 3:43 PM
To Next Page
Loading...
