18
www.insigniaproducts.com
Grounding requirement
Your cooler must be grounded. Your cooler is equipped with a cord having a
grounding wire with a three-prong grounding plug. The plug must be
inserted into an outlet that is properly installed and grounded.
Consult a qualified electrician or service person if the grounding instructions
are not completely understood, or if doubt exists as to whether your cooler is
properly grounded.
Connecting to power
• Plug your cooler into a dedicated, properly installed grounded wall outlet.
Your cooler should be operated on a separate electrical circuit from other
appliances. Any questions concerning power and/or grounding should be
directed toward a certified electrician or an authorized service center.
• Plug in and run your cooler for three to four hours before making any
temperature adjustments and before adding wine. This allows your cooler
to reach a stable temperature.
• Do not use an extension cord with your cooler. If the power cord is too
short, have a qualified electrician install an outlet near your cooler. Use of
an extension cord can negatively affect your cooler’s performance.
WARNINGS:
• Improper use or defeat of the grounding plug can result in a risk of electric
shock.
• Do not, under any circumstances, cut or remove the third ground prong from
the supplied power cord.
CAUTION: Your cooler is not designed to be installed in an RV or used with an
inverter.
Notes:
• Check your local power source. Your cooler requires a 110 V-120 V, 60 Hz
power supply.
• Use a receptacle that accepts the grounding prong. The power cord is
equipped with a 3-prong (grounding) plug which mates with a standard
3-prong (grounding) wall outlet to minimize the possibility of electric shock
hazard from your cooler.
To Next Page
Loading...
Need help?
General
