21
Dual Beer Kegerator/Beverage Cooler
www.insigniaproducts.com
Moving your kegerator
1 Unplug your kegerator from the wall outlet to turn it off.
2 Remove all kegs and beverages.
3 Securely tape down all loose items inside your kegerator.
4 Tape the door shut.
Be sure the kegerator stays in the upright position during
transportation and protect the exterior with a blanket or similar
padding.
Converting your beer dispenser to a
beverage refrigerator
1 Follow the steps in "Replacing kegs" on page 20 and "Replacing the
CO2 tank" on page 20.
2 Remove the draft arm assembly and pull the beer line thru the top of
the cabinet.
3 Replace the top cabinet plug.
4 Remove the guard rail and cover the guard rail installation holes with
the plugs provided.
5 Install the two wire shelves.
6 Adjust the temperature as desired.
To Next Page
Loading...
