18
NS-DD10PDVD19
www.insigniaproducts.com
• 16:9: wide screen display: Select this option to play wide-screen videos
on a wide-screen TV.
• ANGLE MARK—If this option is turned on and the DVD you are watching
has multiple viewing angles, an icon appears in scenes that have multiple
viewing angles. You can select ON or OFF.
• OSD LANGUAGE—Selects the menu language. You can select ENGLISH,
ESPAÑOL, or FRANÇAIS.
• SCREEN SAVER—When this option is turned on, your player displays a
screen saver when the same image stays on the screen for five minutes. You
can select ON or OFF.
• TEXT TO SPEECH—Your DVD player provides audio descriptions of menus
and some remote control functions. You can select ON or OFF.
• LAST MEMORY—When this option is turned on and you open the disc tray,
your player remembers where you stopped. If you close the tray with the
same disc loaded, your player resumes playing where you stopped. You can
select ON or OFF.
4 Use or to select a setting, then press ENTER.
5 Press SETUP to close the menu.
Selecting the audio mode
1 Press SETUP.
2 Press or to select AUDIO, then press ENTER.
3 Press or to select DOWNMIX, then press ENTER.
4 Press or to select a stereo analog audio mode. You can select:
• LT/RT—Select this option if your DVD Player is connected to external
speakers or a sound system with a Dolby Pro Logic decoder.
• STEREO—Select this option when using the two built-in speakers.
5 Press ENTER to save your setting, then press SETUP to close the menu.
Notes:
• The visible picture size is preset on a DVD. Therefore the playback picture of
some DVDs may not conform to the picture size you select.
• When you play DVDs recorded in the 4:3 aspect ratio, the playback picture
always appears in the 4:3 aspect ratio regardless of the TV DISPLAY option
setting.
-- --
DOWNMIX
STR
LT/RT
- - - -
SPEAKER SETUP PAGE
GO TO AUDIO SETUP PAGE
STEREO
To Next Page
Loading...
Need help?
General
