EasyManua.ls Logo

Insignia NS-DPF8TR - Cleaning and Maintenance; Replacing Remote Control Battery

Insignia NS-DPF8TR
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
44
NS-DPF8TR
www.insigniaproducts.com
Cleaning the digital picture frame
Clean the outer surface of the digital picture frame
(excluding the screen) with a soft cloth dampened with
water.
Replacing the remote control battery
To replace the remote control battery:
1
Turn the remote control over.
2 While pressing down on the ridged area of the battery
cover, slide the battery tray out and remove the old
battery.
3 Place a new CR2025 (or equivalent) lithium battery in
the tray, with the positive (+) side facing up.
4 Slide the battery tray back into the remote control.
Caution
The front of the frame is made of glass. Use
caution when cleaning or replacing the frame
cover.
NS-DPF8TR_10-0794_MAN_ENG_V3.fm Page 44 Wednesday, July 28, 2010 8:40 AM

Other manuals for Insignia NS-DPF8TR

Related product manuals