12
NS-HMSB20
www.insigniaproducts.com
Connecting your soundbar
Digital Optical connection (best)
1 Connect one end of the digital optical cable (not included) to your
soundbar.
2 Connect the other end into the Digital Optical Output port on your
source device.
3 Change the device’s audio output to 'PCM' format (typically found in
audio settings). Refer to the documentation that came with your
sound source for more information.
4 Go to Connecting the AC power adapter on page15.
5 After your soundbar is plugged in and turned on, press the SOURCE
button repeatedly on your soundbar or remote control until the
source indicator turns green.
RCA connection (good)
1 Plug the red and white RCA connectors on the RCA audio cable
(included) to the AUX IN jacks on your soundbar, red to red and white
to white.
Important: Make sure that the device you connect and select as your sound
source is outputting sound to the soundbar. See your device's user manual for
more information.
Digital optical cable
(not included)
Back of the soundbar
Audio source (TV, Blu-ray
player, or cable box)
To Next Page
Loading...
