9
2.0 Channel Mini Soundbar
www.insigniaproducts.com
Remote control
3 DIGITAL OPTICAL
jack
If your TV (or other audio source device) has an Optical
OUT jack, connect a digital optical cable (not included)
to your source device and this jack. Make sure that the
sound output from the source is set to PCM format.
4 DC IN jack Connect the AC power adapter to this jack to power the
soundbar.
#BUTTON DESCRIPTION
1 (Power) Press to turn on the soundbar. Press again to put the soundbar
into standby mode.
2 SOURCE Press repeatedly to cycle through the available sound sources.
3 VOL + Press to increase the volume of the soundbar.
4 (previous) In Bluetooth mode, press to skip to the previous track.
5
(play/pause)/
PAIR
• In Bluetooth mode, press to start or pause playback.
• Press and hold this button for three seconds to disconnect
Bluetooth.
6 VOL – Press to decrease the volume of the soundbar.
# ITEM DESCRIPTION
To Next Page
Loading...
